Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform an Oil Change and Oil Filter Replacement on the Honda S660

Model: Honda S660 MK 1 - Years 2015-2022
Part: Engine oil

Follow this guide to perform routine maintenance on your Honda S660 by changing the engine oil and oil filter. First, lift the vehicle and start by loosening the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. Next, use the appropriate wrench to unscrew and remove the oil filter, as shown in the video. Now, replace the filter cartridge with a new one, hand-tightening it before securing it with the wrench. Finally, pour in the oil and check the level using the dipstick!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Fluid in the Honda S660
How to Replace the Brake Fluid in the Honda S660
Honda S660 (2015-2022 / MK 1) In today's tutorial video, you will learn how to bleed and top off the brake fluid in the Honda S660, following the instructions below. First, raise …
How to Replace the Air Filter of the Honda S660?
How to Replace the Air Filter of the Honda S660?
Honda S660 (2015-2022 / MK 1) To replace the air filter of the Honda S660, open the rear hood of the car, where the engine and all mechanical components are located. On the right …
How to Replace the Key Fob Battery for Honda S660
How to Replace the Key Fob Battery for Honda S660
Honda S660 (2015-2022 / MK 1) Replacing the battery in the Honda S660 key fob is an extremely simple and quick task. Here’s how to proceed in this tutorial. You will only need a r…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos