Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump in a Honda Civic?

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Clutch

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the clutch pump in a Honda Civic. First, open the bonnet, then remove the fluid reservoir located on the left side and disconnect the various hoses.

Next, move inside the cabin, unclip the indicated metal clip, and undo the two mounting bolts of the cylinder using a 12mm spanner. At this point, you can extract the pump from the engine bay, insert the replacement, and fit it back following the reverse procedure.

Also, adjust the length of the arm to achieve the desired clutch disengagement.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pump on a Honda Civic
How to Replace the Clutch Pump on a Honda Civic
Honda Civic (1995-2001 / MK 6) In this guide, remove and replace the clutch pump or master cylinder on your Honda Civic. First, open the bonnet of your car and start by removing th…
How to Remove the Clutch Pump from a Honda Civic
How to Remove the Clutch Pump from a Honda Civic
Honda Civic (1992-1995 / MK 5) Before starting, open the driver's door of your Honda Civic. Begin by unhooking and removing the cover near the pedal area. Next, disconnect the hose…
How to Replace the Clutch Pedal on a Honda Civic
How to Replace the Clutch Pedal on a Honda Civic
Honda Civic (1992-1995 / MK 5) Begin by entering the cabin at the driver's seat. Proceed to remove the lower carpet in the pedal area. Then, disconnect the clutch pump from the ped…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos