Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Hydraulic Pump

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Clutch

See other generations:
Video tutorial

Open the front bonnet and ensure it is securely supported; at the rear right of the engine bay (when viewed from the front), you can locate the clutch pump: it is the one furthest to the right. Start by removing the coupling of the pump actuator with the clutch pedal by removing the retaining clip and the pin. Then, remove the oil reservoir support bracket and the pipes connected to the pump; returning to the cabin, unscrew the pump's fixing nuts located just near the clutch pedal, then extract the old pump from the engine bay. Adjust the actuator's stroke on the new pump, apply the oil reservoir after cleaning it, and proceed with the installation of the new pump on the vehicle, securing it to the body and then to the clutch pedal.

At this point, also replace the hydraulic actuator of the clutch located near the gearbox. Fill the reservoir with the specific oil and loosen the bleed screw on the actuator: pump the clutch pedal to allow air to escape from the system.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Pump on a Honda Civic
How to Replace the Clutch Pump on a Honda Civic
Honda Civic (1995-2001 / MK 6) In this guide, remove and replace the clutch pump or master cylinder on your Honda Civic. First, open the bonnet of your car and start by removing th…
How to Remove the Clutch Pump from a Honda Civic
How to Remove the Clutch Pump from a Honda Civic
Honda Civic (1992-1995 / MK 5) Before starting, open the driver's door of your Honda Civic. Begin by unhooking and removing the cover near the pedal area. Next, disconnect the hose…
Clutch Installation Instructions
Clutch Installation Instructions
Honda Civic (1995-2001 / MK 6) It is recommended to carry out this repair only if you have good mechanical knowledge, as replacing the clutch requires removing the gearbox: the vid…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos