Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat on the Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Seat

See other generations:
Video tutorial

In this guide, you will find the instructions to remove and detach the front seat on the Honda CR-V. First, open the front door and start unscrewing all the securing screws located on the seat tracks on the floor; access the rear to unscrew the other screws.

At this point, disconnect the connector located under the seat, raising it until it is completely removed from the cabin; perform the repair or replacement of the front seat, installing it correctly and finally adjusting the seat position.


Posted on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Crankshaft Position Sensor on Honda CR-V 2.4L
How to Replace the Crankshaft Position Sensor on Honda CR-V 2.4L
Honda CR-V (2002-2007 / MK 2) These brief and simple steps will show you how to remove and replace the crankshaft position sensor on the Honda CR-V. First, lift the vehicle and st…
How to Activate the Radio of a Honda CR-V
How to Activate the Radio of a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Before starting, sit in the driver's seat of your Honda CR-V. Begin by activating the instrument cluster, which will also turn on the radio. Next, pr…
Replacing the Solenoid on Honda CR-V
Replacing the Solenoid on Honda CR-V
Honda CR-V (2002-2007 / MK 2) Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the secur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos