Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Solenoid on Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Valve

See other generations:
Video tutorial

Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the securing bolts of the solenoid valve (located in the engine bay) with a socket spanner, remove the valve from its engine seat, and disconnect the power connector.

After comparing the damaged valve with the new one, fit it onto the engine block in the designated space, tighten it securely with the bolts, and reconnect the connector. Start the Honda vehicle and test its operation.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Solenoid Valve from a Honda CR-V
How to Remove the Solenoid Valve from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Learn how to remove and replace the solenoid purge valve on a Honda CR-V. Open the bonnet, lift it, and secure it. Use a socket to undo the fastening…
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
Removal and Replacement of the Sun Visor on the Honda CR-V
Removal and Replacement of the Sun Visor on the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today’s instructions will show you how to remove and replace the sun visor on the Honda CR-V by following these simple steps. First, get inside the c…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos