Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Cr V
    4. : Valve

Honda CR-V - Valve

Valve Honda CR-V (2007-2012 / mk 3)

Honda CR-V (2002-2007 / MK 2)
Replacing the Solenoid on Honda CR-V
Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the securing bolts …Read all…
Posted on 24 April 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to Remove the Solenoid Valve from a Honda CR-V
Learn how to remove and replace the solenoid purge valve on a Honda CR-V. Open the bonnet, lift it, and secure it. Use a socket to undo the fastening bolts of …Read all…
Posted on 10 March 2026 by ScegliAuto

Valve Honda CR-V (2002-2007 / mk 2)

Honda CR-V (2002-2007 / MK 2)
Replacing the Solenoid on Honda CR-V
Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the securing bolts …Read all…
Posted on 24 April 2026 by ScegliAuto
Honda CR-V (2007-2012 / MK 3)
How to Remove the Solenoid Valve from a Honda CR-V
Learn how to remove and replace the solenoid purge valve on a Honda CR-V. Open the bonnet, lift it, and secure it. Use a socket to undo the fastening bolts of …Read all…
Posted on 10 March 2026 by ScegliAuto
Airbag (2) Shocks (6) Antenna (1) Car stereo (12) Anti-roll bar (2) Roof rack bars (3) Battery (8) Ignition coil (1) Control arm (6) Spark plugs (6) Body (14) Control unit (1) Wheel rim (1) Key (27) Trunk lock (1) Timing belt (4) Air conditioner (1) Onboard computer (3) Checks and maintenance (14) Dashboard (5) Shifter boot (1) Bearing (2) MAF sensor (3) Differential (2) Brake rotors (4) Headlight (8) Tail light (5) Fog lights (6) Air filter (15) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (5) Oil filter (4) Grille (2) Accessory kit (17) Light bulb (9) Headlight bulb (14) Tail light bulb (5) Interior dome light bulb (5) Antifreeze coolant (3) Instrument panel light (2) License plate light (6) (2) Handle (2) Exhaust muffler (1) Engine (1) Power window motor (1) Starter motor (2) Transmission fluid (2) Engine oil (10) Clock (15) Door trim panel (10) Windshield (1) Front bumper (3) Rear bumper (2) Brake pads (3) Hydraulic pistons (1) Shift knob (2) Pump (4) Fuel pump (2) Car door (1) Push button (2) Power window switch (1) Instrument cluster (3) Radiator (3) Heater core (1) Fuse box (28) Seat (2) Crankshaft position sensor (3) Parking sensors (2) Door lock (1) Suspension system (1) Side mirror (7) Rearview mirror (3) AdBlue warning light (1) Warning light – error code (33) (1) Tire pressure warning light (140) Service warning light (83) Manufacturer emblem (1) Windshield wipers (13) Cylinder head (3) Drivetrain (1) Center console tunnel (1) Valve (2) EGR valve (2) Blower motor (1) Side window (1) Steering wheel (6)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos