Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Oil Filter on Honda CR-V

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Oil filter

How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew the drain plug of the oil sump (located under the oil sump); allow the fluid to drain into a container. Lift the bonnet and secure it. Using a socket wrench, unscrew the large oil filter. Remove the worn oil filter and position a new one. Top up with new fluid and close the bonnet. Start the engine and check for proper operation of the Honda CR-V.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to replace the oil filter on a Honda CR-V? When replacing the oil, it is advisable to also replace the filter. Lift the bonnet and secure it. Usi…
How to Change the Engine Oil and Oil Filter on a Honda CR-V
How to Change the Engine Oil and Oil Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, this short video will show you how to change the engine oil and oil filter on your Honda CR-V. It is not a very complex operation; just take s…
How to Remove the Oil Filter on a Honda CR-V
How to Remove the Oil Filter on a Honda CR-V
Honda CR-V (2002-2007 / MK 2) Using a special oil filter wrench, unscrew the filter by turning it counterclockwise. Once unscrewed, pull upwards to remove it. At this point, turn …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos