Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Oil Filter on Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Oil filter

See other generations:
Video tutorial

How to replace the oil filter on a Honda CR-V? When replacing the oil, it is advisable to also replace the filter. Lift the bonnet and secure it. Using a socket wrench, unscrew the large oil filter.

Remove the worn oil filter and position a new one. Lift the car on a jack and unscrew the drain plug of the oil sump (located under the oil sump); allow the fluid to drain into a container. Finally, top up with new fluid and close the bonnet.

Start the engine and check for proper operation.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
How to Change the Engine Oil and Oil Filter on a Honda CR-V
How to Change the Engine Oil and Oil Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, this short video will show you how to change the engine oil and oil filter on your Honda CR-V. It is not a very complex operation; just take s…
How to Change the Engine Oil Filter on a Honda CR-V
How to Change the Engine Oil Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) As you know, no matter how new a car is, over time and mileage, small issues can arise that are easily fixable and fortunately inexpensive. In this v…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos