Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil Filter on a Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Engine oil

As you know, no matter how new a car is, over time and mileage, small issues can arise that are easily fixable and fortunately inexpensive. In this video, you will see how to replace the engine oil in your Honda CR-V. Lift the car on a ramp. Next to the oil filter, you will find the oil sump. Using an extractor, unscrew the oil filter. Take the new filter and lubricate it with a drop of new oil. Lower your car and add oil to the designated container. Make sure to add the oil specified on the cap. Check the oil level by pulling out the dipstick located next to the cap. Enter the cabin and turn on the ignition to check the oil percentage added.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2007-2012 / MK 3) Today, this short video will show you how to change the engine oil and oil filter on your Honda CR-V. It is not a very complex operation; just take s…
Honda CR-V (2023-2026 / MK 6, RS) In this video, you will see how to change the oil and filter on a Honda HR-V from 2023 onwards. Start by removing the lower engine cover, then unscre…
Honda CR-V (2012-2017 / MK 4) The oil filter is one of the most important components to consider in your car's maintenance. Each time you change the engine oil, you must also chan…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos