Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Filter Change on a Honda CR-V

Model: Honda CR-V MK 6, RS - Years: 2023, 2024, 2025, 2026
Part: Engine oil

See other generations:
Video tutorial

In this video, you will see how to change the oil and filter on a Honda HR-V from 2023 onwards. Start by removing the lower engine cover, then unscrew the 17 mm plug, and replace the copper washer.

Remove the oil filter with the appropriate tool, clean the seat, lubricate the gasket of the new filter with clean oil, and screw it on by hand for a quarter turn. Fill with approximately 4 litres of 8w20 oil: check the level and then turn on the ignition to fill the filter and check the level again, topping up if necessary.

Then reset the warning light from the maintenance menu by simply holding down until prompted to reset, and confirm.


Posted on 13 February 2026 by ScegliAuto


Related tutorials

Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to replace the oil filter on a Honda CR-V? When replacing the oil, it is advisable to also replace the filter. Lift the bonnet and secure it. Usi…
How to Change the Engine Oil and Oil Filter on a Honda CR-V
How to Change the Engine Oil and Oil Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, this short video will show you how to change the engine oil and oil filter on your Honda CR-V. It is not a very complex operation; just take s…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos