Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Crankshaft Position Sensor on Honda CR-V 2.4L

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Crankshaft position sensor

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the crankshaft position sensor on the Honda CR-V. First, lift the vehicle and start by removing the front right wheel and the wheel arch liner; then disconnect the electrical connector of the position sensor, unscrewing the screw of the crankshaft position sensor to remove it, as shown in the video.

At this point, replace and install the new original sensor, securing it properly and connecting it; reassemble the wheel arch liner and the front wheel!


Posted on 28 March 2026 by ScegliAuto


Related tutorials

Where is the Crankshaft Position Sensor Located on the Honda CR-V?
Where is the Crankshaft Position Sensor Located on the Honda CR-V?
Honda CR-V (2002-2007 / MK 2) In this video, you can see where the crankshaft position sensor is located on the Honda CR-V, useful in case you need to replace it due to a fault. A…
Replacing the Engine Crankshaft Position Sensor
Replacing the Engine Crankshaft Position Sensor
Honda CR-V (2007-2012 / MK 3) Do you have a problem with the engine RPM reading? Is the issue the camshaft position sensor? No problem, I will explain in small steps how to replac…
Where are the fuses located in the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The fuses in the Honda CR-V are located inside the dedicated fuse boxes present in the vehicle: in this type of car, you can find two boxes for conta…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos