|
Do it yourself
| |||
| ||||
How to Install a Child Seat on ISOFIX Anchors
Model: Honda Jazz
MK 4
- Years 2019-2026
Learn how to install a child seat on ISOFIX anchors, which are standard on all vehicles, not just on the Honda Jazz shown in the video. Consult the manual to locate the anchors, which are often found at the junction between the backrest and the seat base of the rear seat, and are two U-shaped bars. In many cars, the anchors are visible; in others, they may be covered by a flap or a plastic button that you will need to push away. Place the child seat on the rear seat, pull the levers or buttons on the seat to extend the two ISOFIX connectors fully; push the seat back and down so that the connectors latch onto the car's ISOFIX bars; check that it is securely attached. Many seats have an indicator that changes from red to green, and when pulled firmly, the seat should not move. For optimal stability, ISOFIX seats have a third anchorage point that can be higher, with a strap that comes from the top of the seat back and must be attached to a point on the rear seat or in the boot; alternatively, a support leg, which is an adjustable leg that fixes to the floor of the car. The seat is removed by pressing the orange button on each ISOFIX connector simultaneously.
Posted on 11 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Honda Jazz
(2008-2013 /
MK 2)
Replacing the rear wiper blade is very straightforward, but pay close attention when purchasing the replacement, as the blade has a specific attachme…
Honda Jazz
(2008-2013 /
MK 2)
Since the deflector is fixed using double-sided adhesive, it is very important to clean the edge of the seal along the door pillar thoroughly: use a …
Honda Jazz
(2008-2013 /
MK 2)
Do you want to replace the timing belt on your car? Let's see how to remove the belt on a Honda Jazz. Lift the front bonnet and locate the parts to b…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.092
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |