Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Window Deflectors

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Accessory kit

Since the deflector is fixed using double-sided adhesive, it is very important to clean the edge of the seal along the door pillar thoroughly: use a cloth and some alcohol. Then remove the protective film from the double-sided adhesive on the edge of the deflector, taking care not to touch it too much with your fingers to avoid altering the adhesive properties. Align the deflector with the edge of the door and, once you are sure of the correct positioning, press along the entire edge to ensure the double-sided adhesive adheres properly to the door edge. Proceed in the same manner on the other doors.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rain Guard Kit for Windows
Rain Guard Kit for Windows
Honda Jazz (2008-2013 / MK 2) To start the installation of your kit, remove the glass seal, but only at the top. To ensure correct installation of the kit, apply an adhesive strip…
Installation of Rear Spoiler
Installation of Rear Spoiler
Honda Jazz (2008-2013 / MK 2) To install the spoiler on the rear bumper, you first need to remove the bumper itself: it is recommended to lift the vehicle on a hydraulic lift to f…
How to install the cargo area cover on the Honda Jazz
How to install the cargo area cover on the Honda Jazz
Honda Jazz (2013-2019 / MK 3) In this video we can see how to install the cargo compartment cover on the Honda Jazz. It is a cover divided into two layers, convenient for storing …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos