Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Jazz
    4. : Accessory kit

Honda Jazz - Accessory kit

Accessory Kit Honda Jazz (2008-2013 / mk 2)

Honda Jazz (2008-2013 / MK 2)
Rain Guard Kit for Windows
To start the installation of your kit, remove the glass seal, but only at the top. To ensure correct installation of the kit, apply an adhesive strip with …Read all…
Posted on 13 February 2026 by ScegliAuto
Honda Jazz (2008-2013 / MK 2)
Replacing Pedal Cover with New Design
The necessary tools are a drill and a rivet gun with a set of rivets. After obtaining the necessary kit for the operation, begin by drilling three holes with a …Read all…
Posted on 10 February 2026 by ScegliAuto
Honda Jazz (2008-2013 / MK 2)
Installation of Window Deflectors
Since the deflector is fixed using double-sided adhesive, it is very important to clean the edge of the seal along the door pillar thoroughly: use a cloth and …Read all…
Posted on 9 February 2026 by ScegliAuto
Honda Jazz (2008-2013 / MK 2)
Install Front Spoiler
Position the vehicle on a lift and, after marking the fixing points with a marker and the template provided in the kit, drill at the marked points to secure …Read all…
Posted on 9 February 2026 by ScegliAuto
Speaker (1) Car stereo (13) Spark plugs (2) Body (3) Key (5) Timing belt (1) Onboard computer (2) Checks and maintenance (10) Rear bench seat (1) Headlight (2) Tail light (1) Cabin air filter (6) Diesel fuel filter (1) Oil filter (1) Accessory kit (4) Light bulb (2) Headlight bulb (8) Tail light bulb (1) License plate light (2) Engine oil (4) Clock (10) Door trim panel (5) Front bumper (1) Rear bumper (1) Shift knob (1) Car door (1) Instrument cluster (1) Wheel (2) Fuse box (11) Seat (2) Door lock (2) Side mirror (4) Warning light – error code (9) Tire pressure warning light (25) Service warning light (39) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (3) EGR valve (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos