Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Pedal Cover with New Design

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

The necessary tools are a drill and a rivet gun with a set of rivets. After obtaining the necessary kit for the operation, begin by drilling three holes with a 3.5 mm drill bit corresponding to the fixing holes of the pedal cover.

Position the rubber cover on the accelerator pedal, then place the new pedal cover and, using a rivet gun, secure it all with four rivets to the underlying pedal. Position the rubber cover on the other pedal, then drill two side holes to be used to secure the pedal cover to the underlying pedal with two rivets.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Change the Oil on the Honda Jazz 2
How to Change the Oil on the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) In this guide, you will learn how to correctly change the oil on your Honda Jazz Mk2 (2008-2013) independently. First, turn off the car completely an…
How to Replace the Engine Oil and Oil Filter on the Honda Jazz
How to Replace the Engine Oil and Oil Filter on the Honda Jazz
Honda Jazz (2008-2013 / MK 2) To replace the engine oil and oil filter on a Honda Jazz, first open the bonnet and then lift the vehicle using a jack to facilitate the oil drainage…
How to Replace the Oil and Air Filter on a Honda Jazz
How to Replace the Oil and Air Filter on a Honda Jazz
Honda Jazz (2001-2008 / MK 1) Today, you will learn how to replace the oil filter and air filter on a Honda Jazz model 1. Start with the oil filter replacement. Open the bonnet an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos