Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Honda Jazz

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and oil filter on a Honda Jazz, first open the bonnet and then lift the vehicle using a jack to facilitate the oil drainage from the sump. Open the oil filter cap, use a combination spanner to remove the filter, and insert the new one. Close the filter cap and open the oil filler cap. Remove the sump plug and allow the liquid to drain out. Close the sump and lower the vehicle.

Complete the replacement by topping up the oil in the reservoir. Start the engine to circulate the oil.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Honda Jazz?
How to Change the Engine Oil and Oil Filter on a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) To replace the oil filter on a Honda Jazz, lift the car and use a special spanner to unscrew the filter. It should be turned counterclockwise to remo…
How to Change the Oil on the Honda Jazz 2
How to Change the Oil on the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) In this guide, you will learn how to correctly change the oil on your Honda Jazz Mk2 (2008-2013) independently. First, turn off the car completely an…
How to Replace the Cabin Filter of the Honda Jazz 2
How to Replace the Cabin Filter of the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos