Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil on the Honda Jazz 2

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

In this guide, you will learn how to correctly change the oil on your Honda Jazz Mk2 (2008-2013) independently. First, turn off the car completely and lift it using a suitable jack.

Then, locate the oil sump at the bottom of the engine bay and place a container underneath it. Unscrew the plug and let all the used oil drain out. Next, replace the filter located nearby, and finally, return to the engine bay to refill the sump with new engine oil.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Honda Jazz?
How to Change the Engine Oil and Oil Filter on a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) To replace the oil filter on a Honda Jazz, lift the car and use a special spanner to unscrew the filter. It should be turned counterclockwise to remo…
How to Replace the Engine Oil and Oil Filter on the Honda Jazz
How to Replace the Engine Oil and Oil Filter on the Honda Jazz
Honda Jazz (2008-2013 / MK 2) To replace the engine oil and oil filter on a Honda Jazz, first open the bonnet and then lift the vehicle using a jack to facilitate the oil drainage…
Where to Find the OBD Port on the 2018 Honda Jazz
Where to Find the OBD Port on the 2018 Honda Jazz
Honda Jazz (2013-2019 / MK 3) If you intend to connect to the ECU of your Honda Jazz third generation (2018), but do not know where the OBD port is located to connect the diagnost…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos