Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Air Filter on a Honda Jazz

Model: Honda Jazz MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine oil

See other generations:
Video tutorial

Today, you will learn how to replace the oil filter and air filter on a Honda Jazz model 1. Start with the oil filter replacement. Open the bonnet and using a combination spanner, remove the filter cap to extract it. Insert the new filter and close the cap. Next, open the engine oil reservoir cap and lift the vehicle with a jack.

Remove the sump plug and let the engine oil drain out. Once finished, replace the sump plug and lower the car back to the ground. Top up the oil in the reservoir and move on to replacing the air filter.

Remove the six screws on the filter cover and take it off, extract the old filter and insert the new one. Finally, replace the cover.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

In the Honda Jazz, how do you reset the service light?
In the Honda Jazz, how do you reset the service light?
Honda Jazz (2008-2013 / MK 2) The video tutorial presented here details how to perform maintenance on a Honda Jazz, starting with an oil change, then oil and air filters, and so o…
How to Replace the Cabin Filter of the Honda Jazz 2
How to Replace the Cabin Filter of the Honda Jazz 2
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…
Honda Jazz Engine Oil Replacement
Honda Jazz Engine Oil Replacement
Honda Jazz (2008-2013 / MK 2) Let's replace the engine oil on a Honda Jazz along with the filter. Open and lift the front bonnet. Raise the car on a column lift or jack, then loos…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos