Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Oil Filter on a Honda Jazz?

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Oil filter

See other generations:
Video tutorial

To replace the oil filter on a Honda Jazz, lift the car and use a special spanner to unscrew the filter. It should be turned counterclockwise to remove it from its housing.

Position a tray under the filter, as removing it will cause oil to spill out. At this point, you can screw in the new filter. To change the oil, open the drain plug of the tank and collect the used oil in the same tray previously used.

Finally, close the drain plug and top up through the designated cap in the engine bay.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Honda Jazz (2008-2013 / MK 2) Let's replace the engine oil on a Honda Jazz along with the filter. Open and lift the front bonnet. Raise the car on a column lift or jack, then loos…
Honda Jazz (2008-2013 / MK 2) If you own a second-generation Honda Jazz (year 2008-2013) and want to learn how to replace the cabin air filter, simply follow these instructions an…
Honda Jazz (2008-2013 / MK 2) To replace the engine oil and oil filter on a Honda Jazz, first open the bonnet and then lift the vehicle using a jack to facilitate the oil drainage…

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos