Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Rear Spoiler

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Body

To install the spoiler on the rear bumper, you first need to remove the bumper itself: it is recommended to lift the vehicle on a hydraulic lift to facilitate disassembly operations and proceed with removing the exhaust pipe cover, the push-fit clips along the lower edge, the screws located along the wheel arch, and those found along the bonnet closing edge. Once the bumper is removed, take off the original spoiler and use the templates provided in the installation kit to mark the points to drill and the portion to cut for the exhaust; once all holes are made, reattach the bumper to the vehicle and apply the new spoiler, securing it first with double-sided tape and finally with the respective screws.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Install Shorter Gear Lever
Install Shorter Gear Lever
Honda Jazz (2008-2013 / MK 2) First, unscrew the gear lever knob and then remove the plastic cover of the centre console (to which the leather gaiter of the gear lever is also att…
How to install the cargo area cover on the Honda Jazz
How to install the cargo area cover on the Honda Jazz
Honda Jazz (2013-2019 / MK 3) In this video we can see how to install the cargo compartment cover on the Honda Jazz. It is a cover divided into two layers, convenient for storing …
Install Front Spoiler
Install Front Spoiler
Honda Jazz (2008-2013 / MK 2) Position the vehicle on a lift and, after marking the fixing points with a marker and the template provided in the kit, drill at the marked points to…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos