Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear bumper on a Honda Accord?

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Rear bumper

See other generations:
Video tutorial

In this tutorial, we will see how to replace the rear bumper on a Honda Accord, a task that is extremely simple and quick. First, we unscrew the three screws accessible from the inside of both wheel wells using a Phillips screwdriver.

Then, we remove the plastic clips located at the lower edge of the bumper and open the trunk lid. Next, we remove the two indicated caps, unscrew the bolts just exposed with a 10mm wrench, and, holding it from one of the two ends, we separate the bumper from the frame.

At this point, all that's left to do is position the replacement part and follow the reverse procedure.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Honda Accord?
How to Remove the Rear Bumper of a Honda Accord?
Honda Accord (2008-2013 / MK 8) To remove the rear bumper of a Honda Accord, open the tailgate so you can loosen the screws located just beneath the seal. Once these screws are loos…
How to disassemble the rear bumper on the Honda Accord?
How to disassemble the rear bumper on the Honda Accord?
Honda Accord (2018-2023 / MK 10) In this tutorial, we can see how to remove the rear bumper on the Honda Accord, an extremely simple and quick operation. First of all, go to the back…
How to Remove the Rear Bumper of the Honda Accord
How to Remove the Rear Bumper of the Honda Accord
Honda Accord (2018-2023 / MK 10) Removing the rear bumper of the Honda Accord is a very simple task that can be done independently, aided by our brief video tutorial. First, remove t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos