Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rear bumper on the Honda Accord?

Model: Honda Accord MK 10 - Years 2018-2023
Part: Rear bumper

In this tutorial, we can see how to remove the rear bumper on the Honda Accord, an extremely simple and quick operation. First of all, go to the back of the vehicle, then locate the plastic rivets on the lower side of the bumper and remove them. Move to the area near a wheel arch, unscrew all the indicated screws and repeat the operation on the opposite wheel arch. At this point, all that remains is to open the trunk door, unscrew the last two remaining screws with a Torx T30 key and separate the bumper from the frame. To install the replacement, simply follow the reverse procedure.

Posted on 1 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Honda Accord (2008-2013 / MK 8) To remove the rear bumper of a Honda Accord, open the tailgate so you can loosen the screws located just beneath the seal. Once these screws are loos…
Honda Accord (2018-2023 / MK 10) Removing the rear bumper of the Honda Accord is a very simple task that can be done independently, aided by our brief video tutorial. First, remove t…
Honda Accord (2002-2007 / MK 7) In this tutorial, we will see how to replace the rear bumper on a Honda Accord, a task that is extremely simple and quick. First, we unscrew the thre…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos