Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Blade on a Honda Jazz

Model: Honda Jazz MK 2 - Years 2008-2013
Part: Windshield wipers

Replacing the rear wiper blade is very straightforward, but pay close attention when purchasing the replacement, as the blade has a specific attachment with the corresponding arm. Once you have purchased the replacement, ensure it is the same length and has the same type of attachment. At this point, lift the wiper arm from the rear window, bend the blade at a ninety-degree angle, and release the fixing pin to completely remove it. Then orient the new blade to insert and lock the pin into the arm's seat and lower the arm.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wiper Blades on a Honda Jazz
How to Replace the Front Wiper Blades on a Honda Jazz
Honda Jazz (2001-2008 / MK 1) Learn how to replace the front wiper blades on a Honda Jazz. Grasp the front wiper arm with your hands; gently pull the wiper blade (without breaking…
Replace the Front Wiper Blades on a Honda Jazz
Replace the Front Wiper Blades on a Honda Jazz
Honda Jazz (2008-2013 / MK 2) In this video, learn how to replace the damaged front wiper blades on a Honda Jazz. Grip the front wiper arm, gently pull the movable blade as shown …
How to Open the Boot Lid of the Honda Jazz
How to Open the Boot Lid of the Honda Jazz
Honda Jazz (2013-2019 / MK 3) Today's guide will show you how to open the rear boot lid of the Honda Jazz in simple steps. To open the rear boot manually, first unlock the door lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos