Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Wiper Pump on Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

Is water no longer coming from the wipers? Learn how to remove the pump of the windscreen washer reservoir. Lift the front bonnet and remove the bumper to access the windscreen washer reservoir.

Once the front bumper is removed, undo the securing screws around the pump, disconnect the power connector, and pull it out from its housing. Refit the new part in the engine compartment, secure it to the water reservoir, and reconnect the power connector.

Always compare the new part with the damaged one before installation. Test the correct operation of the wiper pump.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Honda CR-V?
How to Replace the Wiper Blades on a Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the wiper blades on a Honda CR-V, lift the arms so that the blades are not in direct contact with the windscreen. Position them perpendicu…
Replacing the Front Wipers on a Honda CR-V MK5
Replacing the Front Wipers on a Honda CR-V MK5
Honda CR-V (2017-2022 / MK 5) In this video tutorial, you will learn how to remove and replace the wipers on the fifth series Honda CR-V, as well as on most models from the manufa…
Replacing the Front Wiper Blades on a Honda CR-V Series 1
Replacing the Front Wiper Blades on a Honda CR-V Series 1
Honda CR-V (1995-2001 / MK 1) The video shows how to replace the front wiper blades on a Honda CR-V first series. This is a simple task that can be done in a few minutes without v…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos