Do it yourself
Frequently asked questions about cars and motorcycles

Removing Fuel Filter on Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Diesel fuel filter

Removing the fuel filter on a Honda CR-V, let's see how to do it. Lift the front bonnet, locate the fuel filter as shown in the video. Using a screwdriver/pliers, disconnect the wires and various hoses from the filter (where the fuel filter is located). Unscrew the fastening screws located above the filter cover. Once the cover of the filter is removed, take it out of the vehicle (replace it with a new filter). Install the filter into the attached housing, reconnect the hoses and wires, and tighten the appropriate bolts of the cover. After connecting all the hoses, you can close the front bonnet.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2012-2017 / MK 4) Today, you will learn the steps to replace the cabin air filter on the fourth generation Honda CR-V, from 2012 to 2017. First, open the glove compart…
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to remove and replace the engine air filter on the Honda CR-V L4 2.4L third generation in simple steps. Fi…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos