Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the petrol filter on the Honda CR-V?

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuel filter

See other generations:
Video tutorial

To replace the petrol filter on the Honda CR-V, lift the car with a jack so that the left rear wheel is off the ground: once lifted, loosen the bolts that secure it in place, remove it, and access the components inside the wheel arch. The petrol filter can then be removed and replaced with a new one: this must be properly connected and secured in its place.

After replacement, reattach the wheel arch and the corresponding wheel.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a Honda CR-V
How to Replace the Fuel Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) The fuel filter on the Honda CR-V is mounted directly on the fuel pump, so you will need to completely remove the pump from its housing to replace it…
How to Replace the Cabin Filter on the Honda CR-V
How to Replace the Cabin Filter on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) To replace the cabin filter on the Honda CR-V, lower the glove compartment from the passenger side by detaching its internal side clips. This will al…
How to Replace the Fuel Pump on a Honda CR-V
How to Replace the Fuel Pump on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this guide, you will learn how to replace the fuel pump in your Honda CR-V. First, go to the fuse box under the dashboard (near the pedals) and re…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos