Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Filter on the Honda CR-V MK1

Model: Honda CR-V MK 1 - Years 1995-2001
Part: Diesel fuel filter

In this video tutorial, you will learn how to remove and replace the fuel filter on the first series Honda CR-V in simple steps. First, open the bonnet of your car and start by disconnecting the fuel pipes, using a socket spanner to unscrew the fitting; then use a socket to unscrew the top bolt, removing the pipe as shown in the video. At this point, unscrew the bracket screws to remove and replace the fuel filter with the correct new one; follow the video to the end for reassembly!

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda CR-V (2012-2017 / MK 4) To replace the fuel filter on a Honda CR-V, lift the vehicle to gain easier access to the components under the engine compartment. Loosen the screws …
Honda CR-V (1995-2001 / MK 1) To replace the diesel filter of the Honda CR-V, open the bonnet to access the engine bay, where the filter is located. It is situated directly beneat…
Honda CR-V (2012-2017 / MK 4) To replace the air filter on a Honda CR-V, open the bonnet to access the components inside the engine bay: immediately to the right of the engine blo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos