Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Honda CR-V?

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Side mirror

To replace the external wing mirror on a Honda CR-V, detach the triangular cover located above the door panel, corresponding to the mirror. Next, unscrew the bolts securing the door panel, found at the internal handle location, under the armrest, and near the window switch. By unscrewing these screws and disconnecting the connectors, you can remove the door panel and loosen all screws securing the mirror from the inside. This will allow the unit to be removed and replaced.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Honda CR-V
How to Replace the External Wing Mirror on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this guide, discover how to remove and replace the external wing mirror on the Honda CR-V by following these simple and quick steps. First, open t…
Replacing the External Wing Mirror on the Honda CR-V
Replacing the External Wing Mirror on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) Learn how to remove and replace the external wing mirror on the Honda CR-V in simple and quick steps. First, open the front door and start by removin…
Replacing the External Wing Mirror of the Honda CR-V
Replacing the External Wing Mirror of the Honda CR-V
Honda CR-V (2002-2007 / MK 2) Below are the instructions necessary to remove and replace the external wing mirror of the Honda CR-V. First, open the front door and begin removing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos