Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing External Handle on Honda CR-V

Model: Honda CR-V MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Handle

See other generations:
Video tutorial

Remove the cover screw near the opening handle and unscrew the underlying screw, then unscrew the screw in the door pocket, as shown in the video. Next, remove the internal handle with the entire support and disconnect the cable.

At this point, unscrew the three screws that secure the handle and remove it. Take off the door panel and the underlying cover. Now you can finally see the 10 mm bolt that secures the external handle; unscrew it and remove the handle.

Insert the new external handle and screw in the bolt, then proceed in reverse until complete reassembly.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on the Honda CR-V Mk3
How to Replace the External Door Handle on the Honda CR-V Mk3
Honda CR-V (2007-2012 / MK 3) This guide shows how to replace the external door handle on the Honda CR-V Mk3. After removing the trim piece from the mirror, detach the cover from …
How to open the front door of the Honda CR-V
How to open the front door of the Honda CR-V
Honda CR-V (2012-2017 / MK 4) These brief and simple instructions will show you how to open the doors of the Honda CR-V. First, unlock the door locks by pressing the remote unlock…
How to Replace the External Wing Mirror on a Honda CR-V MK4 (2013)
How to Replace the External Wing Mirror on a Honda CR-V MK4 (2013)
Honda CR-V (2012-2017 / MK 4) Today, you will see the steps to remove and replace the external wing mirror on the fourth generation Honda CR-V in simple and quick steps. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos