Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Honda
  4. :
  5. CR-V
  6. : How to replace the exterior door handle of the Honda CR-V Mk3

Honda CR-V - Video tutorial

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Handle
Operation: How to replace the exterior door handle of the Honda CR-V Mk3

The guide shows how to replace the Honda CR-V Mk3 exterior door handle. After removing the mirror trim piece, detach the cover in the lock assembly and unscrew the two Phillips screws. From the handle compartment, remove the cover and unscrew the cross screw present. From the top and bottom side of the door handle, remove the two covers and unscrew the two screws present. Detach the sides of the door panel and disconnect the lock cables and electrical connectors. Remove the insulating sheet and disconnect the control rod from the lock. With a 10 mm wrench, unscrew the two fixing bolts of the assembly and it is possible to extract the lever of the handle. Reassemble everything in place and check the correct functioning of the lock.


Posted on 16 April 2024 by ScegliAuto



How do you replace the exterior rearview mirror on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) In order to replace the rear view mirror of the Honda CR-V, you need to remove the triangular cover located above the door panel, in correspondence w
How to replace the Honda CR-V exterior mirror
Honda CR-V (2012-2017 / MK 4) Let's find out in this guide how to disassemble and replace the exterior rearview mirror of the Honda CR-V, following these simple and quick steps. F
How to replace the outside rearview mirror on Honda CR-V MK4 (2013)
Honda CR-V (2012-2017 / MK 4) Today we will see the steps to disassemble and replace the exterior rearview mirror on the fourth series Honda CR-V, in simple and quick steps. First

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos