Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Heating Resistor Block

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Heater core

Under the glove compartment on the passenger side, there is a black plastic cover secured with clips. Simply pull this black panel down to remove it. Near the white connector, there is a slightly hidden bolt to remove. This will allow you to take out and move the resistor module out of this compartment for easier access. Once pulled out, disconnect it from the connector and remove it completely. Take the new part, reconnect it to the connector, and insert it back into position. Reassemble everything by following the steps in reverse.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Solenoid on Honda CR-V
Replacing the Solenoid on Honda CR-V
Honda CR-V (2002-2007 / MK 2) Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the secur…
Replacement of Airbag Horn Switch
Replacement of Airbag Horn Switch
Honda CR-V (2007-2012 / MK 3) A crucial component for your safety. To access it, remove the panel on the underside of the steering wheel and disconnect the connectors, which shoul…
How to Replace the Hydraulic Struts in a Honda CR-V
How to Replace the Hydraulic Struts in a Honda CR-V
Honda CR-V (2017-2022 / MK 5) Frequent use of the boot can lead to faults in a strut; in this guide, we will see how to replace it in a Honda CR-V. Start by prying on the block at…

How to Set the Time on the New Vespa 2023

In this new mini guide dedicated to your new Vespa 2023, discover how to manually change the time displayed on the central dashboard. First, position your Vespa on the stand. Then, insert the key and start the instrument panel. At this point, locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the dashboard starts to flash and press it multiple times to change both the hour and minute digits. When finished, turn off the panel and you are done.

Watch the video!


by ScegliAuto

More videos