Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Glove Box from a Citroen Berlingo/Peugeot Partner

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Glove compartment

See other generations:
Video tutorial

To perform this operation, you only need a plastic lever, gentle hands, and a bit of patience. Open the glove box normally and examine the top part.

According to the video, there is a strip or frame of plastic that is glued or clipped in place on both the right and left sides. Using the plastic lever, gently detach this part by prying downwards or inwards.

Once released on both sides, this cover will drop down. Do this because underneath this cover are the pins that hold the glove box. After lowering this cover, you will see a white plastic pin (or a light-coloured one) on each side.

To remove them, push or slide each pin outwards. Once the pin is out of its seat, it will detach from that side.

With both pins removed, the glove box will completely detach from the dashboard. Be careful as the pins can break; do not use metal tools that could scratch the plastics.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

Citroen Berlingo (2008-2018 / MK 2) The information provided in this guide will show us how to disassemble and replace the entire dashboard of the Citroen Berlingo, as well as the Peuge…
Citroen Berlingo (2008-2018 / MK 2) Today's guide will show you the steps to remove and replace the door panel on a Citroen Berlingo, as well as on a Peugeot Partner. First, open the fr…
Citroen Berlingo (2008-2018 / MK 2) The following steps will show you how to remove and replace the front door panel of the Citroen Berlingo, as well as the Peugeot Partner Tepee. First…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos