Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Airbag Horn Switch

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Airbag

A crucial component for your safety.
To access it, remove the panel on the underside of the steering wheel and disconnect the connectors, which should be one yellow and one black. Using a Torx bit, unscrew the bolts on the sides of the steering wheel and lift the front panel of the steering wheel where the car logo is located. This will remove the entire airbag block; simply refit the new block and retrace all the steps in reverse, taking care with the connectors.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Acoustic Warning Device
Replacement of the Acoustic Warning Device
Honda CR-V (2012-2017 / MK 4) The acoustic warning device is crucial for road safety; in case of failure, it must be replaced immediately. The acoustic warning device is located b…
Where are the Fuses Located in a Honda CR-V?
Where are the Fuses Located in a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The fuses in the Honda CR-V are located inside the designated fuse boxes mounted on the vehicle: the first is behind the plastic panel located at the…
How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos