Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Steering wheel

Today's instructions will show you how to remove and replace the steering wheel of the Honda CR-V in simple and quick steps. First, get inside the vehicle and begin by removing the airbag from the steering wheel by unscrewing the fixing screws located at the back; then unscrew the central screw of the steering wheel, disconnecting the wiring for the steering controls to pull it out and remove it, as shown in the video. At this point, install the new steering wheel in a perfectly straight position, finally installing its airbag and making the connection!

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel on a Honda CR-V?
How to Remove the Steering Wheel on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) In this tutorial, see how to remove the steering wheel on a Honda CR-V, a very simple and quick operation. Before doing this, to avoid accidental air…
Cruise Control Switch Replacement on Honda CR-V
Cruise Control Switch Replacement on Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the cruise control switch on a Honda CR-V, follow these steps: 1) Disconnect the battery. 2) Remove the cover at the base of the steering …
How to Reset the Warning Light on a Honda CR-V
How to Reset the Warning Light on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to reset the warning light on a Honda CR-V? Turn on the instrument cluster of your car with the appropriate remote key; switch on the car's multi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos