Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Steering Wheel Control Button on a Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Push button

In this video, see how to remove the steering wheel button. Get a plastic spatula and unclip the cover behind the steering wheel. Disconnect the power connectors, start unscrewing all the screws with your socket wrench, then remove the steering wheel airbag. Unscrew the central tightening bolt of the steering wheel, remembering to mark with a marker the points for remounting it. Carefully extract the steering wheel, avoiding damaging the wires, unscrew the button screws. Refit the new button by screwing in the screws. Insert the steering wheel onto the central bolt, aligning it with the marks made earlier with the marker, tighten the central bolt with your ratchet wrench, and reconnect the cables. Install the power cable and place the airbag on the steering wheel, tighten all side screws, and reconnect all connectors. Finally, close the small compartment with the cover. Plastic spatula for removal, socket wrench, screwdrivers, Torx bits, socket keys.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Time on the Honda CR-V
How to Change the Time on the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Below are the instructions to change the time on the small display of the Honda CR-V's radio. First, get inside the vehicle and turn on the instrumen…
How to Reset the Warning Light on a Honda CR-V
How to Reset the Warning Light on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to reset the warning light on a Honda CR-V? Turn on the instrument cluster of your car with the appropriate remote key; switch on the car's multi…
How to Remove the Steering Wheel of the Honda CR-V
How to Remove the Steering Wheel of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's instructions will show you how to remove and replace the steering wheel of the Honda CR-V in simple and quick steps. First, get inside the ve…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos