Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. CR-V
    4. : How to remove the steering wheel on the Honda CR-V?

Honda CR-V - Video tutorial

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Steering wheel
Operation: How to remove the steering wheel on the Honda CR-V?

In this tutorial we can see how to disassemble the steering wheel in the Honda CR-V, a very simple and quick operation. Before doing this, in order to avoid accidental activation of the airbag, we open the hood and disconnect the negative terminal of the battery. We start by going inside the cabin, then we unscrew the screw located on the right rear area of the steering wheel with a Torx T30 key. We then remove the cover, disconnect the two connectors and remove the airbag from the steering wheel. At this point, we can unscrew the large central bolt with a 10mm hex key and separate the steering wheel from the steering column.


Posted on 20 March 2024 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos