Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Headlight Bulb on Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial video, learn how to remove and replace the front headlight bulb on a Honda CR-V. First, open the bonnet from inside the car and prop it up: then disconnect the electrical connector of the bulb found at the back of the headlight and subsequently remove the rubber protective cap of the bulbs.

At this point, unclip the metal spring holding the bulb in place and remove it; replace it with the new one (in this case, H4 fitting).

Follow the tutorial video to the end for reassembly!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…
Honda CR-V (2002-2007 / MK 2) This video shows the replacement of the front headlamp bulb in a Honda CR-V. After obtaining the correct replacement part, disconnect the electrical …
Honda CR-V (1995-2001 / MK 1) Replacing the front headlight bulb in the Honda CR-V is very simple as there is enough room in the engine compartment. Once the front bonnet is opene…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos