Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Headlight

This video shows the replacement of the front headlamp bulb in a Honda CR-V. After obtaining the correct replacement part, disconnect the electrical connection of the headlamp by hand. At this point, remove the plastic cover protecting the bulb by pulling its black tab towards you. Disengage the metal clip located at the back of the bulb. Position the new bulb in the same position as the one just removed, using the metal tabs as a reference. Reattach the metal clip and reposition the plastic cover. Finally, restore the electrical connection.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Honda CR-V?
How to replace the headlight bulb of the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…
How to Replace a Front Headlamp Bulb on the Honda CR-V
How to Replace a Front Headlamp Bulb on the Honda CR-V
Honda CR-V (2017-2022 / MK 5) To replace a front headlamp bulb on your vehicle, follow these steps: open the bonnet, locate the headlamp containing the bulb to be replaced. At the…
How to Replace the Headlight Bulb on the Honda CR-V
How to Replace the Headlight Bulb on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) If you intend to replace a headlight bulb yourself on this model, the description below outlines the steps to perform the replacement. After opening …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos