Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlamp on a Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

In this tutorial, see how to replace the front headlamp on a second-generation Honda CR-V, produced from 2002 to 2007. To remove the old headlamp, first remove the radiator grille and the front bumper by taking out all the clips and bolts holding them in place as shown in the video.

Once done, to remove the old headlamp, take a 10mm socket and start unscrewing the screws that secure it in place, then disconnect all connectors from the back of the headlamp and remove it. Finally, fit a new headlamp following the reverse procedure.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to remove the front headlight on the Honda CR-V MK4
How to remove the front headlight on the Honda CR-V MK4
Honda CR-V (2012-2017 / MK 4) In today's video, we will see how to remove and replace the front headlight of the Honda CR-V fourth series, following these simple steps. First, ope…
How to Replace the Front Headlight on a Honda CR-V
How to Replace the Front Headlight on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) This replacement is very straightforward if you follow this brief guide. Start by releasing and lifting the bonnet, which allows you to see where the…
How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos