Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight on the Honda CR-V MK4

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Headlight

In today's video, we will see how to remove and replace the front headlight of the Honda CR-V fourth series, following these simple steps. First, open the bonnet and start by removing the front bumper, unscrewing all the upper fixing screws and those found on both sides of the wheel arches; then use a lever to remove the plastic clips of the front headlight, as shown in the video. At this point, unscrew the additional screws of the headlight using a socket spanner; disconnect the electrical connector of the bulbs to remove it and replace it with the new one!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Honda CR-V
Replacing Front Headlight Bulb on Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this tutorial video, learn how to remove and replace the front headlight bulb on a Honda CR-V. First, open the bonnet from inside the car and prop…
How to Replace the Front Headlight of the Honda CR-V
How to Replace the Front Headlight of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will see how to disassemble and replace the front headlight of the Honda CR-V, following the instructions provided below.…
How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos