Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Modification of Noisy Front Trim

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Grille

If there are noise issues due to vibrations from the front trim, it can be modified with a simple operation. Remove the fixing screws of the front trim located in the engine bay and under the bodywork. After this operation, completely remove the trim. Apply double-sided tape to the upper part of the bodywork to create a cushion between the trim and the bodywork itself. Reassemble the previously removed parts onto the new trim. Gently position the trim in its housing and reinsert all previously removed screws.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Differential Oil Replacement
Differential Oil Replacement
Honda CR-V (2002-2007 / MK 2) If the differential is noisy, periodic oil replacement is essential to maintain mechanical efficiency. Lift the vehicle and secure it. Drain the oil …
Installation of Side Mud Flaps
Installation of Side Mud Flaps
Honda CR-V (2002-2007 / MK 2) To prevent the front wheels from dirtying the vehicle during winter, it is possible to install mud flaps. For this modification, obtain the original …
How to Replace the Gear Shift Gaiter of the Honda CR-V
How to Replace the Gear Shift Gaiter of the Honda CR-V
Honda CR-V (2012-2017 / MK 4) You can purchase an aftermarket gear shift cover complete with a knob, made of leather with coloured stitching. The disassembly is quite straightforw…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos