Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Radiator Fan

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Radiator

See other generations:
Video tutorial

This video shows how to remove and replace the radiator fan on your car. First, remove anything that obstructs the work; you need to remove the front grille and the aluminium bar located just above the radiator. Once the pieces are removed, you can start working on its removal; disconnect any connections supplying power to the fan and begin unscrewing the screws that anchor it to the radiator.

Once the connections are disconnected and the screws removed, proceed to extract the fan itself by sliding it upwards parallel to the radiator.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) The fuses in the Honda CR-V are located inside the dedicated fuse boxes present in the vehicle: in this type of car, you can find two boxes for conta…
Guide to Replacing the Timing Chain on the Honda CR-V 2.2 I-CDTI
Guide to Replacing the Timing Chain on the Honda CR-V 2.2 I-CDTI
Honda CR-V (2002-2007 / MK 2) Today, discover the procedure to remove and replace the timing chain on the Honda CR-V 2.2 I-CDTI. First, open the bonnet of your car and begin by re…
How to Replace the Front Wheel Bearing on a Honda CR-V
How to Replace the Front Wheel Bearing on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) To replace the front wheel bearing on your vehicle, follow the instructions below and refer to the video. First, remove the front wheel. Then, loosen…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos