Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in the Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

In today's video, see how to replace the radio in the Honda CR-V. Unscrew the two screws holding the plastic trim in place. You can now unclip it and remove it from its location; if needed, use a plastic trim tool or a screwdriver to assist.

Once the trim is removed, disconnect the power connector for the four indicators. Now remove the four screws that hold the radio in position.

Pull it out and disconnect the cables at the back. Now remove the metal frame that holds the radio and reuse it for the installation of the new radio.

Proceed in reverse for the installation.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Retrieve the Radio Code for the Honda CR-V
How to Retrieve the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to retrieve and enter the radio code for the Honda CR-V in simple steps. First, get inside the vehicle and…
How to reset the radio in the Honda CR-V?
How to reset the radio in the Honda CR-V?
Honda CR-V (2002-2007 / MK 2) In this tutorial, you will see how to reset the radio in the Honda CR-V, a very simple operation to perform, for example, after replacing the battery…
How to Remove the Radio from a Honda CR-V
How to Remove the Radio from a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Before starting, sit in the driver's seat of your Honda CR-V. Begin by prying and removing the climate control buttons and the upper air vents using …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos