Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the radio in the Honda CR-V?

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to reset the radio in the Honda CR-V, a very simple operation to perform, for example, after replacing the battery. First, insert the key and turn on the instrument panel, then press and hold the "1" and "6" buttons while simultaneously turning on the radio.

Once done, take note of the 8-digit code displayed, also retrieve the serial number of the car located on the windscreen, and go to the indicated website or an equivalent one. After following the instructions to obtain the unlock code, return to the radio and enter it using the numbered buttons.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Reset the Radio of the Honda CR-V
How to Reset the Radio of the Honda CR-V
Honda CR-V (2002-2007 / MK 2) Follow this procedure to reset the car radio: enter the cabin and sit in the driver's seat, turn on the radio, and it will display "code". Next, turn…
How to Find and Enter the Radio Code for the Honda CR-V
How to Find and Enter the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's guide will show you how to retrieve and enter the radio code to unlock all stations on the Honda CR-V. First, get inside the vehicle and turn…
How to Retrieve the Radio Code for the Honda CR-V
How to Retrieve the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Turn the key to switch on the instrument panel, thus powering the vehicle. Now press and hold buttons 1 and 6 on the radio while simultaneously press…

    Frequently Asked Questions

    • Cr V 2012-2017 - What does the PGM-FI error mean on the Honda CR-V? Read answer
    • Cr V 2007-2012 - What does the PGM-FI light on the Honda CR-V mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos