Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Rear Panel Protection on the Honda CR-V

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Body

This guide shows how to install this beautiful chrome protection on the rear panel of the Honda CR-V boot. It is an accessory that can be purchased ready for installation on any e-commerce platform. For example, on eBay, it costs £54.99 (including delivery) with code 5338952560, but there is also a beautiful steel and carbon version with code 121912576828 for £89.48 (same conditions). The installation is very easy. First, thoroughly clean the boot lip, then simply remove the protective backing from the adhesive strips and press firmly to adhere the piece. In addition to enhanced protection, an aesthetic result is also assured.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in the Honda CR-V
How to Replace the Radio in the Honda CR-V
Honda CR-V (2002-2007 / MK 2) In today's video, see how to replace the radio in the Honda CR-V. Unscrew the two screws holding the plastic trim in place. You can now unclip it and…
How to Replace the Remote Battery on a Honda CR-V?
How to Replace the Remote Battery on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the remote battery on a Honda CR-V, loosen the small screw located at the top rear of the device, just below the key. Once this screw is r…
How to Replace the Rear Windscreen Wiper Blade on a Honda CR-V?
How to Replace the Rear Windscreen Wiper Blade on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the rear windscreen wiper blade on a Honda CR-V, lift the arm connected to the wiper blade so that the parts are perpendicular to the rear…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos