Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Bull Bar Protection Kit

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Accessory kit

See other generations:
Video tutorial

To better protect the front of the vehicle from potential damage, it is advisable to install an additional protective Bull Bar made of steel. The operation is very simple and does not require special tools.

Lift the car on a ramp to facilitate the installation process. Remove the four retaining bolts of the current protection and then insert and tighten the two supplied bolts with an Allen key to secure the protective bar. Fix the bar with the remaining bolts and tighten them securely with a ratchet spanner.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Installation of the Engine Cover
Installation of the Engine Cover
Honda CR-V (2007-2012 / MK 3) This brief video illustrates the procedure to install the engine cover on a Honda CR-V. First, mount the two brackets for the cover and tighten them …
Installing the Rear Panel Protection on the Honda CR-V
Installing the Rear Panel Protection on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) This guide shows how to install this beautiful chrome protection on the rear panel of the Honda CR-V boot. It is an accessory that can be purchased r…
Installing a Rear Spoiler
Installing a Rear Spoiler
Honda CR-V (2007-2012 / MK 3) After purchasing the necessary kit, start marking, using the appropriate template, the points where the fixing holes will be drilled. Protect the bod…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos