Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Rear Spoiler

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

After purchasing the necessary kit, start marking, using the appropriate template, the points where the fixing holes will be drilled. Protect the bodywork with a cloth to prevent metal shavings from scattering inside or on the seals.

Use a punch to mark the four points to be drilled. With the help of a drill, make the necessary holes which will be enlarged with a router.

Glue the rubber seals onto the holes and insert the metal inserts onto which the various fixing screws will be screwed. Position the spoiler and screw in the bolts, tightening the nuts securely.

Close the holes with the appropriate plastic covers.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Installation of Front Spoiler
Installation of Front Spoiler
Honda CR-V (2012-2017 / MK 4) Lift the vehicle on a hydraulic lift to facilitate the installation of the air deflector under the front bumper. First, remove the two pressure clips…
Installing a Rear Spoiler
Installing a Rear Spoiler
Honda CR-V (2012-2017 / MK 4) First, open the tailgate until it is securely held open. Using a plastic bodywork spatula, detach the plastic trim along the upper edge of the bonnet…
Installation of Rear Spoiler
Installation of Rear Spoiler
Honda CR-V (2007-2012 / MK 3) First, remove the caps at the end of the rubber strips along the edges of the roof, near the rear bonnet. Use the supplied drilling template to mark …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos