Do it yourself
Frequently asked questions about cars and motorcycles

Installation of Front Spoiler

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

Lift the vehicle on a hydraulic lift to facilitate the installation of the air deflector under the front bumper. First, remove the two pressure clips in the central area, align the spoiler so that the fixing holes of the pressure clips match, and insert them; temporarily apply masking tape to hold it better and drill small holes.

Remove the pressure clips and the spoiler again; enlarge the holes to 13 mm, remove any burrs, and insert the threaded inserts. Reposition the spoiler, insert the two lower pressure clips, and then the fixing screws.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Honda CR-V (2012-2017 / MK 4) First, open the tailgate until it is securely held open. Using a plastic bodywork spatula, detach the plastic trim along the upper edge of the bonnet…
Honda CR-V (2007-2012 / MK 3) First, remove the caps at the end of the rubber strips along the edges of the roof, near the rear bonnet. Use the supplied drilling template to mark …
Honda CR-V (2007-2012 / MK 3) After purchasing the necessary kit, start marking, using the appropriate template, the points where the fixing holes will be drilled. Protect the bod…

Where is the Starter Motor Fuse Located in the Renault Scenic?

In this video, you can see where the starter motor fuse is located in the Renault Megane, which is the first component to check in case of sudden malfunction. As shown, it is found in the fuse box within the engine compartment, to your right when facing the vehicle. To access it, first remove the plastic cover and then lift the fuse box. The fuse in question is located on the lower side, between the two connectors, and is rated at 25A. If faulty, ensure you use a replacement with the same specifications.

Watch the video!


by ScegliAuto

More videos