Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radio/Navigator from Honda CR-V

Model: Honda CR-V MK 4 - Years 2012-2017
Part: Car stereo

In this video tutorial, you will see how to remove the radio/navigation system from a Honda CR-V produced between 2012 and 2016. First, get inside the vehicle and gather a screwdriver and a plastic lever. Then, remove the plastic trim surrounding the air vents by pulling it out. Next, use a screwdriver to take out the fastening screws located underneath and extract the unit, disconnecting the electrical connectors at the back by pressing on the tabs. Follow the reverse procedure for reassembly.

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Find and Enter the Radio Code for the Honda CR-V
How to Find and Enter the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's guide will show you how to retrieve and enter the radio code to unlock all stations on the Honda CR-V. First, get inside the vehicle and turn…
How to retrieve the radio code for the Honda CR-V
How to retrieve the radio code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this video tutorial, we will see how to retrieve and enter the radio code of the Honda CR-V, in simple steps. First of all, we get on board the ca…
How to Retrieve the Radio Code for the Honda CR-V
How to Retrieve the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Turn the key to switch on the instrument panel, thus powering the vehicle. Now press and hold buttons 1 and 6 on the radio while simultaneously press…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos