Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on the Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

If you intend to replace a headlight bulb yourself on this model, the description below outlines the steps to perform the replacement. After opening the bonnet and locating the headlight with the bulb to be replaced, disconnect the electrical connector and remove the rear rubber cover.

Then, unclip the bulb retaining pin and extract the bulb. Take the new bulb and position it in the headlight, then reclip it, replace the cover, and reconnect the electrical connector.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Honda CR-V?
How to replace the headlight bulb of the Honda CR-V?
Honda CR-V (2017-2022 / MK 5) To replace the headlight bulb of the Honda CR-V, open the bonnet to access the rear of the headlight. Here, you will find the connector attached to t…
How to Replace the Front Headlamp Bulb on a Honda CR-V?
How to Replace the Front Headlamp Bulb on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the front headlamp bulb on a Honda CR-V, open the bonnet to access the components inside the engine bay: inside the headlamp, there will b…
How to Replace the Front Headlamp Bulb on a Honda CR-V?
How to Replace the Front Headlamp Bulb on a Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the front headlamp bulb on a Honda CR-V, remove the rivets located at the top of the bumper and inside the wheel arch corresponding to the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos